[Changes of parameters associated with anemia of inflammation in patients with stage â ¢ periodontitis before and after periodontal initial therapy].

OBJECTIVE: To investigate the differences and similarities of parameters associated with anemia of inflammation between patients with stage Ⅲ periodontitis and periodontally healthy volunteers, and to explore the influence of periodontal initial therapy on those indicators. METHODS: Patients with stage Ⅲ periodontitis and periodontally healthy volunteers seeking periodontal treatment or prophylaxis at Department of Periodontology, Peking University School and Hospital of Stomatology from February 2020 to February 2023 were enrolled. Their demographic characteristics, periodontal parameters (including probing depth, clinical attachment loss, bleeding index), and fasting blood were gathered before periodontal initial therapy. Three months after periodontal initial therapy, the periodontal parameters of the patients with stage Ⅲ periodontitis were re-evaluated and their fasting blood was collected again. Blood routine examinations (including white blood cells, red blood cells, hemoglobin, packed cell volume, mean corpuscular volume of erythrocytes, and mean corpuscular hemoglobin concentration) were performed. And ferritin, hepcidin, erythropoietin (EPO) were detected with enzyme-linked immunosorbent assay (ELISA). All data analysis was done with SPSS 21.0, independent sample t test, paired t test, and analysis of covariance were used for comparison between the groups. RESULTS: A total of 25 patients with stage Ⅲ periodontitis and 25 periodontally healthy volunteers were included in this study. The patients with stage Ⅲ periodontitis were significantly older than those in periodontally healthy status [(36.72±7.64) years vs. (31.44±7.52) years, P=0.017]. The patients with stage Ⅲ periodontitis showed lower serum hemoglobin [(134.92±12.71) g/L vs. (146.52±12.51) g/L, P=0.002] and higher serum ferritin [(225.08±103.36) µg/L vs. (155.19±115.38) µg/L, P=0.029], EPO [(41.28±12.58) IU/L vs. (28.38±10.52) IU/L, P < 0.001], and hepcidin [(48.03±34.44) µg/L vs. (27.42±15.00) µg/L, P=0.009] compared with periodontally healthy volunteers. After adjusting the age with the covariance analysis, these parameters (hemoglobin, ferritin, EPO, and hepcidin) showed the same trends as independent-sample t test with statistical significance. Three months after periodontal initial therapy, all the periodontal parameters showed statistically significant improvement. The serum hemoglobin raised [(146.05±15.48) g/L vs. (133.77± 13.15) g/L, P < 0.001], while the serum ferritin [(128.52±90.95) µg/L vs. (221.22±102.15) µg/L, P < 0.001], EPO [(27.66±19.67) IU/L vs. (39.63± 12.48) IU/L, P=0.004], and hepcidin [(32.54±18.67) µg/L vs. (48.18±36.74) µg/L, P=0.033] decreased compared with baseline. CONCLUSION: Tendency of iron metabolism disorder and anemia of inflammation was observed in patients with stage Ⅲ periodontitis, which can be attenuated by periodontal initial therapy.

TNF-α promotes expression of inflammatory factors by upregulating nicotinamide adenine dinucleotide phosphate oxidase-2 expression in human gingival fibroblasts.

Background/purpose: Periodontitis is a chronic infectious disease. The oxidative stress environment can cause or exacerbate the inflammation in periodontitis. Nicotinamide adenine dinucleotide phosphate oxidase (NOX) may be the most important source of reactive oxygen species (ROS) in periodontal tissues. The pathological mechanism of periodontitis may be related to the increased ROS caused by enhanced NOX activity. The purpose was to investigate the effect of tumor necrosis factor (TNF-α) on inflammatory cytokines and ROS, and the role of NOX-2 in human gingival fibroblasts (HGFs). Materials and methods: HGFs were cultured and divided into the normal control group (NC group) and the inflammatory model group (TNF-α group) induced by 10 ng/ml TNF-α. Thereafter, NOX-2 siRNA was used to knock down NOX-2 gene expression. Quantitative real-time PCR was applied to detect IL-6, MCP-1, and NOX-2 mRNA levels. The levels of IL-6 and MCP-1 protein were examined by ELISA. The level of NOX-2 was evaluated by Western blot. ROS expression was measured by the fluorescence microplate. Results: The mRNA and protein expression levels of IL-6, MCP-1, and NOX-2 were significantly increased, and the expression of ROS was significantly elevated in response to 10 ng/ml TNF-α. Compared with the si-NC group, the mRNA and protein expression levels of IL-6 and MCP-1 were significantly down-regulated and ROS expression was significantly decreased in the si-NOX2 group stimulated by 10 ng/ml TNF-α. Conclusion: TNF-α promotes the expression of NOX-2 in human gingival fibroblasts and enhances the expression of inflammatory factors and ROS in human gingival fibroblasts through the upregulation of NOX-2 partly.

Application of 3D digital smile design based on virtual articulation analysis in esthetic dentistry: A technique.

A technique for the application of a virtual articulation system in 3-dimensional digital smile design (DSD) during esthetic restoration is described. To acquire stable occlusion and a smooth jaw movement pattern without premature contacts or interference, a digital facebow and a virtual articulator were used to collect and analyze a patient's occlusal data and jaw movement information. The original pattern of occlusal contacts and jaw movements were diagnosed as stable and copied to the digital design of the new prostheses. Preparation of the abutments, crown lengthening surgery, and definitive crown fabrication and cementation were performed according to the design. After 9 months, the occlusion remained stable, and the patient was satisfied with the outcome.

Three-dimensional assessment of periodontal support of lower incisors for skeletal Class II malocclusion undergoing presurgical orthodontic treatment with different vertical skeletal patterns.

BACKGROUND: The aim of the present study was to compare periodontal support changes during retraction of mandibular anterior teeth for skeletal Class II malocclusion with different facial divergence and to analyze relevant factors influencing bone remodeling by applying three-dimensional (3D) cone-beam computed tomography (CBCT) reconstruction technology. METHODS: Forty-eight patients with Class II malocclusion requiring surgical orthodontic treatment enrolled in the study were divided into the hyperdivergent group (n = 16), normodivergent group (n = 16) and hypodivergent group (n = 16) according to their vertical skeletal patterns. Cone-beam computed tomography (CBCT) scans were obtained before treatment (T1) and after presurgical orthodontic treatment (T2). The two-dimensional (2D) alveolar bone morphology, movement of mandibular central incisors and volume of the alveolar bone around incisors were measured on the labial and lingual sides by 3D CBCT reconstruction technology. Statistical analyses were performed with one-way ANOVA, paired t tests and multiple linear regression. RESULTS: During presurgical orthodontic treatment, the alveolar bone height on the labial side of the hyperdivergent group decreased significantly (P ≤ 0.05), but was maintained in the normodivergent and hypodivergent groups (P > 0.05). However, the alveolar bone volume, alveolar bone thickness at each level and alveolar bone height on the lingual side decreased significantly for all the groups. Apart from the initial morphometric measurements at T1, the morphology of lingual alveolar bone at T2 was significantly influenced by the direction and amount of tooth movement. Horizontal retraction and vertical protrusion of the root apex were negatively related to the alveolar bone on the lingual side after presurgical orthodontic treatment. CONCLUSION: For Class II malocclusion patients undergoing presurgical orthodontic treatment, the changes in the periodontal support of the lower central incisors varied in different vertical skeletal patterns. There exists a great periodontal risk of alveolar bone resorption on the lingual side for various vertical types. To avoid alveolar bone deterioration, it is essential to investigate the bone remodeling of patients with different alveolar bone conditions and cautiously plan tooth movement prior to orthodontic treatment. Moreover, 3D measurements based on CBCT construction can provide complementary information to traditional 2D measurements.

Effect of augmented corticotomy-assisted presurgical orthodontic treatment on alveolar bone fenestration and dehiscence in skeletal class III patients.

Background/purpose: Alveolar bone fenestration and dehiscence is common in untreated patients and potentially harmful. This study was to evaluate the effect of augmented corticotomy (AC) on the prevention and treatment of alveolar bone defects in skeletal class III high-angle patients during presurgical orthodontic treatment (POT). Materials and methods: Fifty patients with skeletal Class III high-angle malocclusion were enrolled, of whom 25 patients (G1) underwent traditional POT and 25 patients (G2) received AC during POT. The alveolar bone fenestration and dehiscence around the upper and lower anterior teeth were measured by CBCT. The incidence and transition of fenestration and dehiscence in the two groups were compared by the chisquare and Mann‒Whitney rank-sum tests. Results: Before treatment (T0), the incidence of fenestration and dehiscence around the anterior teeth of all patients was 39.24% and 24.10%, respectively. After POT (T1), the incidence of fenestration in G1 and G2 was 49.83% and 25.86%, respectively, and the incidence of dehiscence in G1 and G2 was 58.08% and 32.07%, respectively. For teeth without fenestration and dehiscence at T0, more anterior teeth in G1 exhibited fenestration and dehiscence at T1 than in G2. For teeth with fenestration and dehiscence at T0, most transitions in G1 were maintained or worsened, but "cure" cases were observed in G2. After POT, the cure rates of fenestration and dehiscence in G2 were 80.95% and 91.07%, respectively. Conclusion: During the POT of skeletal Class III high-angle patients, augmented corticotomy can significantly treat and prevent alveolar bone fenestration and dehiscence around anterior teeth.

Human ß-defensins are correlated with the immune infiltration and regulated by vitamin D3 in periodontitis.

OBJECTIVE: Exploring the correlation between human ß-defensins (HBDs) and immune infiltration in periodontitis, and whether it is regulated by vitamin D3 . BACKGROUND: The human body produces essential antimicrobial peptides called HBDs, which are associated with periodontitis. There is a strong link between periodontal tissue destruction and the immune cell infiltration. Moreover, vitamin D3 has been reported to regulate the expression of immune cell chemokines. However, the relationship between vitamin D3 , HBDs, and immune infiltration in periodontitis remains to be investigated. METHODS: The Gene Expression Omnibus database was accessed to obtain transcriptomic information of gingival samples taken from periodontitis patients. The expression value of HBD-2 and HBD-3 was calculated. Additionally, using the online program ImmuCellAl, 10 immune cells were scored for immune infiltration in the high-HBDs-expression group and the low-HBDs-expression group, separately. After that, transcriptome sequencing was done based on human gingival fibroblasts that had received vitamin D3 treatment. Furthermore, hGFs were treated by vitamin D3 , tumor necrosis factor-α (TNF-α), and Porphyromonas gingivalis lipopolysaccharide (Pg-LPS). The expressions of HBD-2, HBD-3, interleukin-8 (IL-8), and monocyte chemoattractant protein-1 (MCP-1) were detected. To seek the potential mechanism, CYP27A1 siRNA was employed to reduce the expression of CYP27A1, and nuclear factor-gene binding protein 65 (NF-κB p65) was examined. RESULTS: In GSE10334, the expressions of HBD-2 and HBD-3 were down-regulated in periodontitis group. Meanwhile, monocyte, macrophage, and CD4_T cell were less infiltrated in low-HBD-2-expression group, while less Gamma-delta T-cell infiltration was found in low-HBD-3-expression group. Transcriptome sequencing found that 21 genes were significantly expressed, of which the function was enriched in response to bacterial origin and TNF signal pathway. Vitamin D3 could significantly up-regulate the expression of HBD-2 and HBD-3, which could be controlled by knocking down CYP27A1 mRNA expression. With prolonged vitamin D3 stimulation, the expression of HBD-2 and HBD-3 increased. TNF-α/Pg-LPS could significantly increase the expression of HBD-2, HBD-3, IL-8, MCP-1, and p65, all of which were reduced by vitamin D3 . CONCLUSION: HBDs are correlated with immune infiltration in periodontitis. Vitamin D3 inhibits the expression of HBDs and chemokines induced by TNF-α/Pg-LPS, possibly through NF-κB pathway, in human gingival fibroblasts.

Accuracy of three-dimensional periodontal ligament models generated using cone-beam computed tomography at different resolutions for the assessment of periodontal bone loss.

Objective: To develop a method for generating three-dimensional (3D) digital models of the periodontal ligament (PDL) using 3D cone-beam computed tomography (CBCT) reconstruction and to evaluate the accuracy and agreement of the 3D PDL models in the measurement of periodontal bone loss. Methods: CBCT data collected from four patients with skeletal Class III malocclusion prior to periodontal surgery were reconstructed at three voxel sizes (0.2 mm, 0.25 mm, and 0.3 mm), and 3D tooth and alveolar bone models were generated to obtain digital PDL models for the maxillary and mandibular anterior teeth. Linear measurements of the alveolar bone crest obtained during periodontal surgery were compared with the digital measurements for assessment of the accuracy of the digital models. The agreement and reliability of the digital PDL models were analyzed using intra- and interexaminer correlation coefficients and Bland-Altman plots. Results: Digital models of the maxillary and mandibular anterior teeth, PDL, and alveolar bone of the four patients were successfully established. Relative to the intraoperative measurements, linear measurements obtained from the 3D digital models were accurate, and there were no significant differences among different voxel sizes at different sites. High diagnostic coincidence rates were found for the maxillary anterior teeth. The digital models showed high intra- and interexaminer agreement. Conclusions: Digital PDL models generated by 3D CBCT reconstruction can provide accurate and useful information regarding the alveolar crest morphology and facilitate reproducible measurements. This could assist clinicians in the evaluation of periodontal prognosis and establishment of an appropriate orthodontic treatment plan.

The tendency of anemia of inflammation in periodontal diseases.

Anemia of inflammation (AI) is associated with inflammatory diseases, and inflammation-induced iron metabolism disorder is the major pathogenic factor. Earlier studies have reported a tendency of AI in periodontitis patients, but the explicit relationship and possible pathological mechanisms remain unclear. Here, the analyses of both periodontitis patients and a mouse model of ligature-induced experimental periodontitis showed that periodontitis was associated with lower levels of hemoglobin and hematocrit with evidence of systemic inflammation (increased white blood cell levels) and evidence of iron restriction (low serum iron along with a high serum hepcidin and ferritin levels), in accordance with the current diagnosis criteria for AI. Moreover, periodontal therapy improved the anemia status and iron metabolism disorders. Furthermore, the increased level of hepcidin and significant correlation between hepcidin and key indicators of iron metabolism emphasized the pivotal role of hepcidin in the pathogenesis of periodontitis-related AI. Administration of the signal transducer and activator of transcription 3 (STAT3) inhibitors Stattic suggested that the IL-6-STAT3-hepcidin signaling pathway participated in this regulatory process. Together, these findings demonstrated that periodontitis should be considered an inflammatory disease that contributes to the development of AI; furthermore, IL-6-STAT3-hepcidin signaling pathway plays a key regulatory role in the pathogenesis of periodontitis-related AI. Our study will provide new insights into the systemic effects of periodontitis, while meaningfully expanding the spectrum of inflammatory diseases that contribute to AI.

Augmented corticotomy-assisted presurgical orthodontic treatment to prevent alveolar bone loss in patients with skeletal Class III malocclusion.

INTRODUCTION: The objective of this study was to explore the effect of augmented corticotomy (AC) on anterior alveolar bone morphology in presurgical orthodontic treatment for skeletal Class III malocclusion. METHODS: Thirty-six surgical patients with skeletal Class III malocclusion with high-angle were included: 18 (AC group) accepted AC surgery during presurgical orthodontic treatment, and 18 (control group) accepted traditional presurgical orthodontic treatment. Cone-beam computed tomography scans were obtained before treatment (T0) and after presurgical orthodontic treatment (T1). The alveolar bone morphology, root length, dehiscence, and movement of mandibular central incisors were measured by cone-beam computed tomography using Dolphin software. Statistical analyses were performed with independent-sample t tests, paired t tests, and multiple linear regression. RESULTS: After presurgical orthodontic treatment, the whole alveolar bone thickness at each level, alveolar bone area, and alveolar bone height decreased significantly in the control group but increased or remained unchanged in the AC group. In the AC group, the lower the labial alveolar bone height at T0 was, the greater the increase after T1; the change in alveolar bone thickness was related to ΔL1-MP and sex. At T0, the incidences of dehiscence were similar in the 2 groups, ranging from 11.11% to 16.67%. At T1, the labial and lingual incidences of dehiscence in the AC group were 0% and 27.78%, compared with 55.56% and 66.67% in the control group. CONCLUSIONS: During presurgical orthodontic treatment, AC is effective in preventing alveolar bone resorption and dehiscence without additional root resorption. AC can be recommended for high-angle skeletal Class III patients with thin alveolar bone around anterior teeth during presurgical orthodontic treatment.

Knowledge Sharing for Pulmonary Nodule Detection in Medical Cyber-Physical Systems.

With the rapid development of edge intelligence (EI) and machine learning (ML), the applications of Cyber-Physical Systems (CPS) have been discovered in all aspects of the life world. As one of its most essential branches, Medical CPS (MCPS) determines human health and medical treatment in the Internet of Everything (IOE) era. Knowledge sharing is the critical point of MCPS and has also been humanity's best dream through the ages. This paper explores a novel knowledge-sharing model in MCPS and takes a pulmonary nodule detection task as a significant case for building an Unet-based mask generator. A Classification-guided Module (CGM)-based discriminator with knowledge from EMRs is set against a generator to offer a promising result for each mask from the inexperienced participant of federated ML. After an iterative communication between the federated server and its clients for knowledge sharing, the segmented sub-image owns a coincident attribute distribution with that of the EMRs from the experts. Besides, the adversarial network augment the data to normalize the data distribution for all the clients as a remission for none independent identically distributed (non-IID) data problem. We implement a detection framework on the simulated EI environment following an existing adaptive synchronization strategy based on data sharing and median loss function. On 1304 scans of the merged dataset, our proposed framework can help boost the detection performance for most of the existing methods of pulmonary nodule detection.

Association between Osteoprotegerin rs2073618 polymorphism and peri-implantitis susceptibility: a meta-analysis.

OBJECTIVES: Peri-implantitis was an inflammatory progress on the tissue around the implant. The Osteoprotegerin G1181C (rs2073618) polymorphism was reported to be related to the increased risk of the peri-implantitis, whereas another found no relationship. The present study was conducted to research the relationship between Osteoprotegerin rs2073618 polymorphism and peri-implantitis susceptibility. MATERIALS AND METHODS: The meta-analysis was performed according to the Preferred Reporting Items for Systematic reviews. Electronic databases including PubMed, Web of science, Springer Link and Embase (updated to April 15, 2022) were retrieved. The cohort study, case-control study or cross-sectional study focusing on the Osteoprotegerin rs2073618 polymorphism and peri-implantitis were retrieved. The data included basic information of each study and the genotype and allele frequencies of the cases and controls. RESULTS: Three studies were finally included, including 160 cases and 271 controls. Allelic model, homozygote model, recessive model, dominant model, and heterozygous model were established to assess the relationship between OPG rs2073618 polymorphism and peri-implantitis susceptibility. The Osteoprotegerin rs2073618 polymorphism was significantly associated with peri-implantitis in Recessive model and Homozygote model. CONCLUSION: OPG rs2073618 polymorphism in Recessive model and Homozygote model was highly likely related to the risk of peri-implantitis. PROSPERO registration number: CRD42022320812.

Clinical, Histological, and Radiological Outcomes of Sinus Floor Elevation Using a New Approach before Extraction of Periodontally Hopeless Maxillary Molars: A Case Report with 3-year Follow-Up.

Introduction. This report is the first to present a case with 3-year follow-up, in which sinus floor elevation was performed before extraction of periodontally hopeless teeth, in order to shorten the edentulous interval between extraction and loading of implants and improve the patient's quality of life. Case Presentation. After a series of initial and supportive periodontal therapies, the lateral window was created at the apices of the hopeless teeth, followed by grafting of bone substitute and membrane material at the sinus floor. The tooth was preserved for 13 months prior to extraction followed by immediate implant placement. The patient is satisfied with the oral function partially retained during the treatment period. Predominance of new bone was detected by histologic analysis. The available bone height was augmented from 1-2 to 12-14 mm with little resorption (less than 2 mm of height) after 3 years of follow-up. The dental implant is in good condition without obvious signs of peri-implantitis or mobility after 3 years of loading. Discussion. The feasibility of modified sinus floor elevation (MSFE) could be seen in the current case. The potential benefit of MSFE may include shortening the edentulous interval, facilitating bone regeneration, and providing a chance for immediate implant placement. However, further clinical case evaluations and controlled studies are required to determine indications, effectiveness, and safety of such augmentation procedures.

Potential links between COVID-19 and periodontitis: a bioinformatic analysis based on GEO datasets.

BACKGROUND: 2019 Coronavirus disease (COVID-19) is an infectious disease caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The COVID-19 pandemic has already had a serious influence on human existence, causing a huge public health concern for countries all around the world. Because SARS-CoV-2 infection can be spread by contact with the oral cavity, the link between oral illness and COVID-19 is gaining traction. Through bioinformatics approaches, we explored the possible molecular mechanisms linking the COVID-19 and periodontitis to provide the basis and direction for future research. METHODS: Transcriptomic data from blood samples of patients with COVID-19 and periodontitis was downloaded from the Gene Expression Omnibus database. The shared differentially expressed genes were identified. The analysis of Gene Ontology, Kyoto Encyclopedia of Genesand Genomes pathway, and protein-protein interaction network was conducted for the shared differentially expressed genes. Top 5 hub genes were selected through Maximal Clique Centrality algorithm. Then mRNA-miRNA network of the hub genes was established based on miRDB database, miRTarbase database and Targetscan database. The Least absolute shrinkage and selection operator regression analysis was used to discover possible biomarkers, which were then investigated in relation to immune-related genes. RESULTS: Fifty-six shared genes were identified through differential expression analysis in COVID-19 and periodontitis. The function of these genes was enriched in regulation of hormone secretion, regulation of secretion by cell. Myozenin 2 was identified through Least absolute shrinkage and selection operator regression Analysis, which was down-regulated in both COVID-19 and periodontitis. There was a positive correlation between Myozenin 2 and the biomarker of activated B cell, memory B cell, effector memory CD4 T cell, Type 17 helper cell, T follicular helper cell and Type 2 helper cell. CONCLUSION: By bioinformatics analysis, Myozenin 2 is predicted to correlate to the pathogenesis and immune infiltrating of COVID-19 and periodontitis. However, more clinical and experimental researches are needed to validate the function of Myozenin 2.

Periodontal soft tissue increase induced by periodontally accelerated osteogenic orthodontics surgery.

OBJECTIVES: To quantitatively assess periodontal soft tissue changes, including gingival thickness and keratinized gingiva width after periodontally accelerated osteogenic orthodontics (PAOO) surgery by digital measurements.  METHODS: This study enrolled 15 maxillaries with 89 anterior teeth and 16 mandibles with 94 anterior teeth from Chinese adult patients with skeletal Angle Class III malocclusion for whom PAOO surgery was proposed during orthodontic treatment. Intraoral scanning and cone beam computed tomography (CBCT) examinations were performed before PAOO surgery and 6 months after the surgery. Keratinized gingiva width was measured on the digital model acquired by intraoral scanning. The gingival thickness was measured using a digital three-dimensional (3D) model based on the combination of digital intraoral scanning and CBCT data. RESULTS: The mean gingival thickness before surgery was 0.91 ± 0.32 mm and 1.21 ± 0.38 mm at 6-month after PAOO. Patients showed periodontal soft tissue increase with a mean gingival tissue gain of 0.30 ± 0.33 mm. At 1 mm, 2 and 3 mm apical to cemento-enamel junction (CEJ) levels, the gingival thickness increase of the mandible was higher than that of the maxilla (0.38 ± 0.30 mm vs. 0.24 ± 0.31 mm, 0.43 ± 0.35 mm vs. 0.26 ± 0.41 mm, 0.36 ± 0.27 vs. 0.25 ± 0.32 mm, respectively, all P < 0.05). Moreover, the sites of gingival thickness ≤ 1 mm before surgery showed more tissue gain than the sites > 1 mm (0.36 ± 0.32 mm vs. 0.18 ± 0.31 mm, P < 0.001). The mean keratinized gingiva width at T0 was 3.88 ± 1.22 mm, and increased 1.05 ± 1.24 mm 6 months after PAOO surgery. Moreover, a digital 3D model for gingival thickness measurement based on the combination of digital intraoral scanning and CBCT displayed high reliability and accuracy with an intra-class correlation coefficient (ICC) of 0.897. CONCLUSION: PAOO could improve an insufficient quantity of periodontal soft and hard tissues in patients with skeletal Angle Class III malocclusion, including the gingival thickness and keratinized gingiva width. A digital 3D model based on the combination of digital intraoral scanning and CBCT data could provide a new digital measurement of gingival thickness with high accuracy and reliability.

Three-dimensional measurement of periodontal support during surgical orthodontic treatment of high-angle skeletal Class III malocclusion: A retrospective study.

INTRODUCTION: This study aimed to quantify the periodontal health of incisors during surgical orthodontic treatment in patients with high-angle Class III malocclusion using a cone-beam computed tomography (CBCT) 3-dimensional (3D) reconstruction technique. METHODS: The sample consisted of 30 patients with high-angle Class III malocclusion (mean age, 20.53 ± 2.86 years). CBCT images were taken before treatment (T0), after presurgical orthodontic treatment, and after treatment (T2). In addition, 3D tooth and alveolar bone models were generated. The root surface area, periodontal ligament (PDL)_Area, and vertical bone level (VBL) around the maxillary and mandibular central incisors were measured. RESULTS: The root surface area and PDL_Area of maxillary and mandibular central incisors decreased continuously between T0 and T2 (P <0.01). At T2, mandibular central incisors showed 38.64 ± 13.39% PDL_Area loss, and maxillary central incisors exhibited 21.13 ± 16.48% PDL_Area loss. For mandibular central incisors, the PDL_Area loss caused by VBL loss was significantly greater than that for maxillary central incisors (P <0.01) and significantly greater than the PDL_Area loss caused by root resorption (P <0.01). From T0 to T2, the lingual surface of maxillary central incisors exhibited greater VBL loss than the other 3 surfaces (P <0.01), and the labial and lingual surfaces of mandibular central incisors demonstrated greater VBL loss than proximal surfaces (P <0.01). CONCLUSIONS: The 3D CBCT reconstruction method provides useful information regarding the periodontal defects of incisors in patients with high-angle skeletal Class III malocclusion. The PDL_Area of maxillary and mandibular central incisors decreased continuously during the treatment. Vertical alveolar bone levels at proximal surfaces appeared to be relatively stable.

Obstructive Sleep Apnea Detection Scheme Based on Manually Generated Features and Parallel Heterogeneous Deep Learning Model Under IoMT.

Obstructive sleep apnea (OSA) syndrome is a common sleep disorder and a key cause of cardiovascular and cerebrovascular diseases that seriously affect the lives and health of people. The development of Internet of Medical Things (IoMT) has enabled the remote diagnosis of OSA. The physiological signals of human sleep are sent to the cloud or medical facilities through Internet of Things, after which diagnostic models are employed for OSA detection. In order to improve the detection accuracy of OSA, in this study, a novel OSA detection system based on manually generated features and utilizing a parallel heterogeneous deep learning model in the context of IoMT is proposed, and the accuracy of the proposed diagnostic model is investigated. The OSA recognition scheme used in our model is based on short-term heart rate variability (HRV) signals extracted from ECG signals. First, the HRV signals and the linear and nonlinear features of HRV are combined into a one-dimensional (1-D) sequence. Simultaneously, a two-dimensional (2-D) HRV time-frequency spectrum image is obtained. The 1-D data sequences and 2-D images are coded in different branches of the proposed deep learning network for OSA diagnosis. To validate the performance of the proposed scheme, the Physionet Apnea-ECG public database is used. The proposed scheme outperforms the existing methods in terms of accuracy and provides a novel direction for OSA recognition.

Plasma SiOx:H Nanocoatings to Enhance the Antibacterial and Anti-Inflammatory Properties of Biomaterials.

PURPOSE: To evaluate the antibacterial and anti-inflammatory properties of SiOx:H nanocoatings using a plasma-deposition technique. MATERIALS AND METHODS: Four groups of SiOx:H nanocoatings were prepared by plasma nanocoating technique using different deposition gases and durations, specifically trimethylsilane (TMS) for groups A1 and A2 and a mixture of TMS and oxygen for groups B1 and B2. Changes in surface chemistry and physical properties were measured. Staphylococcus aureus and Streptococcus mutans were cultured on plasma SiOx:H nanocoatings to evaluate antibacterial and antibiofilm formation activities. Human gingival fibroblasts (HGFs) and HaCaT human keratinocytes were cultured and stimulated with tumor necrosis factor-α (TNF-α). Cell viability was measured using a Cell Counting Kit-8 (CCK-8) assay. Quantitative real-time polymerase chain reaction (qRT-PCR) and enzyme-linked immunosorbent assay (ELISA) were used to evaluate anti-inflammatory properties, including the mRNA and protein levels of inflammatory mediators and proinflammatory cytokines. RESULTS: The carbon content was dominant in group A nanocoatings and the oxygen and silicon elements were dominant in group B nanocoatings. Groups A2 and B2 were approximately threefold thicker than groups A1 and B1. The plasma SiOx:H nanocoatings decreased bacterial growth and biofilm formation by 30-70% (p < 0.05). Scanning electron microscopy (SEM) revealed damaged biofilm structures. Moreover, the antibacterial properties of group B were greater than group A, and the antibacterial properties of groups A2 and B2 were more effective than A1 and B1, respectively. CCK-8 assays revealed the plasma SiOx:H nanocoatings had good biocompatibility. Furthermore, under TNF-α-induced inflammation, the mRNA and protein levels of interleukin-6, interleukin-8, cyclooxygenase-2, and monocyte chemoattractant protein-1 were downregulated in the plasma SiOx:H nanocoating groups (p < 0.05). CONCLUSION: Plasma SiOx:H nanocoatings exerted antibacterial and anti-inflammatory effects with excellent biocompatibility. Therefore, the plasma SiOx:H nanocoating technique has potential for implant materials and other medical devices.

Microbiological and clinical evaluation of ultrasonic debridement with/without erythritol air polishing during supportive periodontal therapy in arches with full-arch fixed implant-supported prostheses: protocol for a randomised controlled trial.

INTRODUCTION: Implant-supported prostheses are often successfully used in edentulous patients. However, the incidences of peri-implant mucositis and peri-implantitis increase over time. The accumulation of pathogenic bacteria adjacent to prostheses can induce peri-implant disease. Plaque removal is recommended to prevent and manage peri-implant diseases. The purpose of this study is to compare the plaque removal efficacy of ultrasonic debridement with/without erythritol air-polishing powder around implants and bridges in patients with full-arch fixed implant-supported prostheses as well as the effects of these two methods on the rates of peri-implant mucositis and peri-implantitis, and the submucosal microbiota composition over 5 years in patients undergoing supportive periodontal therapy. METHODS AND ANALYSIS: We plan to enrol 10 edentulous (maxilla and/or mandible) patients seeking full-arch fixed implant-supported prostheses. The study will use a split-mouth model in which contralateral quadrants are randomly assigned to two groups. Group 1: one contralateral quadrant of full-arch fixed implant-supported prostheses will undergo ultrasonic debridement combined with erythritol air-polishing powder. Group 2: a separate contralateral quadrant of full-arch fixed implant-supported prostheses will undergo ultrasonic debridement. The 5-year trial will involve a total of 10 re-examinations per participant. The mucosal conditions around the implants will be recorded at 6-month intervals after restoration. Peri-implant submucosal plaque will be collected at each re-examination, and the bacterial flora will be analysed by 16s ribosomal RNA gene sequencing. X-ray examinations will be conducted at 12-month intervals to evaluate the marginal bone level around implants. ETHICS AND DISSEMINATION: This prospective single-centre, randomised controlled trial (PKUSSIRB-202054045) has been approved by the Ethics Committee of Stomatology School and Hospital of Peking University. Data will be registered with the International Clinical Trials Registry Platform. Additionally, we will disseminate the results via publication in scientific journals. TRIAL REGISTRATION NUMBER: ChiCTR-2000032431.

Digital Workflow for Full-Arch Immediate Implant Placement Using a Stackable Surgical Guide Fabricated Using SLM Technology.

The failing dentition of partially edentulous individuals may be used as an initial reference for stackable restrictive surgical guides during full-arch immediate implant placement. The stackable guide option derived from a digital workflow increases the predictability of the performance of bone reduction, immediate implant placement, and immediate loading of provisional implant-supported fixed dental prostheses. The present paper aims to report a practical approach to design and produce a metal framework with occlusal rests to facilitate the use of a tooth-supported surgical guide when full-arch immediate implant placement is indicated in patients with failing dentition.

Nomogram prediction of vulnerable periodontal condition before orthodontic treatment in the anterior teeth of Chinese patients with skeletal Class III malocclusion.

OBJECTIVE: To establish and verify models predictive of thin periodontal phenotype and alveolar fenestration/dehiscence in the anterior teeth of patients with skeletal Class III malocclusion. MATERIAL AND METHODS: Retrospective data of 669 anterior teeth (305 in maxillae and 364 in mandibles) from 80 patients with skeletal Class III malocclusion before augmented corticotomy were collected. Distribution of thin periodontal phenotype and alveolar fenestration and dehiscence were evaluated and their associations with potential influencing factors were explored using univariate and multivariate analyses. The predictive models were visualized as nomograms, the accuracy of which was tested by receiver operating curve analyses. RESULTS: Thin phenotype was associated with Mazza bleeding index, sex, tooth type, probing depth and width of keratinized gingiva (WKG). Labial dehiscence was associated with age, jaw, labial bone thickness, mandibular plane angle, sagittal root position (SRP), sex, tooth type, and WKG. Labial fenestration was associated with sex, tooth type, SRP, and periodontal phenotype. The areas under the curves of nomogram prediction models for periodontal phenotype, alveolar dehiscence, and alveolar fenestration were 0.84, 0.81, and 0.73, respectively. CONCLUSIONS: Female sex, lateral incisor, and limited WKG may be risk factors for thin periodontal phenotype. Age, canine, male sex, mandible, thin labial bone thickness, and root positioned against the labial plate may be risk factors for labial dehiscence; and female sex, thick phenotype, root positioned against the labial plate, lateral incisor, and canine may be risk factors for labial fenestration. The predictive performance of the models was acceptable.